Technical Sales 1–800–458–3687

Baileigh Rotary Draw Bender Accessories

Rotary Indexing Table

What is the perfect complement to any computer controlled Baileigh Tube and Pipe Bender?  A rotary indexing table, of course.

A Baileigh Industrial tube bender fitted with a rotary positioning table allows for accurate bends in varying planes, as well as consistent measurements between bends. Available for the RDB-250, 325, and 350-TS, the tables are available in lengths of 5, 10, 15, and 20', there is a table perfect for any size shop.  Only have some jobs that would require the rotary indexing table, it can be attached or taken off of the pipe bender with ease.

The table comes with an 8" three jaw chuck with 2-1/2 inch thru hole that allows for longer pieces of tubing than the table length. Chuck can handle up to 4-1/2 inch OD. The minimum OD is 1/4 inch.  The table has a linear indicator strip so the operator can set up accurate distances between bends. Mechanical stops can be positioned for the start of each bend. Using the mechanical stops is very beneficial for repeatability on bigger production runs.  Another nice feature of the table is that the positioning carriage rolls on a precision V block rail and rides the rail using V-block bearings.  These bearings are placed on eccentric shafts, which allows for tolerance adjustment allowing the most accurate results.

For more information, please contact Baileigh Industrial at 800-458-3687

Click on part number below to be directed to pricing table

Rotary Draw Indexing Tables
IDX-10-250 10' Index Table for RDB-250
IDX-10-CMH-4-250 10' Index Table for RDB-250 w / 4-Jaw Chuck
IDX-10-325 10' Index Table for RDB-325
IDX-10-CMH-4-325 10' Index Table for RDB-325 w / 4-Jaw Chuck
IDX-10-350 10' Index Table for RDB-350
IDX-10-CMH-4-325 10' Index Table for RDB-325 w / 4-Jaw Chuck
IDX-15-250 15' Index Table for RDB-250
IDX-15-CMH-4-250 15' Index Table for RDB-250 w / 4-Jaw Chuck
IDX-15-325 15' Index Table for RDB-325
IDX-15-CMH-4-325 15' Index Table for RDB-325 w / 4-Jaw Chuck
IDX-15-350 15' Index Table for RDB-350
IDX-15-CMH-4-350 15' Index Table for RDB-350 w / 4-Jaw Chuck
IDX-20-250 20' Index Table for RDB-250
IDX-20-CMH-4-250 20' Index Table for RDB-250 w / 4-Jaw Chuck
IDX-20-325 20' Index Table for RDB-325
IDX-20-CMH-4-325 20' Index Table for RDB-325 w / 4-Jaw Chuck
IDX-20-350 20' Index Table for RDB-350
IDX-20-CMH-4-350 20' Index Table for RDB-350 w / 4-Jaw Chuck

 

Angle Finder AF-360D

Angle Finder AF-360D

ANGLE FINDERS INSTANTLY IMPROVE ACCURACY WHEN TUBE BENDING ON VARYING PLANES! WORKS WITH ANY BRAND OF BENDER!

The AF-360D angle finder or tubing bender plane of bend degree indicator is a must for any fabricator who is working with hand railing, auto chassis, etc., anything that requires an accurate rotation of the previous bend completed, before performing the next bend. A tube or pipe bender that has a positioning table is complimented with the attachment of an AF-360D angle finder. When bending complex exhaust with multiple bends on varying planes (if you can imagine rotating the tube up into the air and then down again to clear a drive shaft or suspension). There is also a benefit when bending hand railing to rotate pipe 32° for the stairwell pitch. Knowing where the plane of bend is exactly saves time and materials, and increases profit to the tubing bender

  • Attach the AF-360D to the following end of tube or pipe before bending, complete a bend and rotate material accurately to desired degree and before next bend.
  • Digital indicator accurately detects where plane of bend is within total 360 ° rotation in 180° increments.
  • Fits 3/4" OD, up to 3.5" OD
  • Ensures that pipe or tube stays on a level plane.
  • Immediate payback due to material savings when tube bending.
  • Perfect for all applications that require more than one bend in material.

Click on part number below to be directed to pricing table

Angle Finder / Radius Gauges
ORG-3600 Outside Radius Gauge 
IRG-3600 Inside Radius Gauge
AF-360D 360 deg. Digital Angle Finder (must be purchased with AF-360D-Holder)
AF-360D-HOLDER Clamp and Holder for AF-360D Angle Finder

 

Universal Bending Plate

These types of machines can bend with standard tooling and be limited to bend only up to 206 degrees when standard tubing and pipe dies are being used. However, if the fabricator needs to bend solid bar or rounds to into various shapes, then the RDB electric programmable controllers can bend in either direction using the UBP-1200 universal bending plate.

The UBP-1200 universal bend plate is made from solid steel for long life and comes with the plate that gets bolted to the drive plate on the universal bender.  It comes with a round center die, removable pin for start and stop of bend, as well as the roller counter die assembly.  With multiple holes drilled and tapped throughout the plate the fabricator has endless capabilities on one simple tooling set.

Call your Baileigh representative to find out more about the universal bend plate option for your universal bender with electronic programmable controllers.  We typically have this in stock for same day shipments.  Of course confirm that this option will work with your model of machine before ordering.

Click on part number below to be redirected to pricing table

Universal Bend Plate
UBP-1200-100 Bend Plate for RDB-100
UBP-1200-125 Bend Plate for RDB-125
UBP-1200-150 Bend Plate for RDB-150
UBP-1200-175 Bend Plate for RDB-175
UBP-1200-250 Bend Plate for RDB-250
UBP-1200-325 Bend Plate for RDB-325
UBP-1200-350 Bend Plate for RDB-350
UBP-1200-500 Bend Plate for RDB-500

 

Bend Tech - Tube and Pipe Bending Layout Software

Tube Bender Layout Software

Baileigh Industrial now offers two versions of its popular Bend Tech® tube and pipe bending layout software, Bent Tech-Pro® and Bend-Tech SE®.  This tube bending software helps the fabricator design profitable pipe and tubing designs, saving set up costs (material waste) on any brand of bender, but is esspecialy helpful when using our RDB line of benders.  This layout software can be learned in minutes and will save the any shop that has to bend tube and pipe tons of money in material savings.

Some of the features of the Bend-Tech line are as follows:

  • Easy Design Input
  • Pick Points for Dimensional Placement
  • Parametric Style Interface
  • CLR or Inside Radius (adjustable for each bend)
  • Bend Allowance and K-factor available Rotate Sections to Create a True 3D Part
  • Material Data Base
  • Parts are Placed in a Data Base for Future Retrieval
  • Graphical Part Recall
  • Help Functions are Fully Video Scripted (Learn BEND-TECH in 30 Minutes)
  • 3D Shaded Model can be Rotated Dynamically
  • Create prints of the Dimensional Model, Shaded Model, Flat Layout and Title Block/li>
  • Flat Development for Cut Length and Bending Locations
  • Dimension; Start of Bend, End of Bend and Center of Bend, from either Direction.
  • Dimension with Decimals or Fractions
  • Flat Includes Bending Data, such as, Bend Angles, CLR or Inside Radius, Rotation Angle, and Bend Order
  • Preferences; Colors, Text Sizes and Arrow Sizes are Saved in User Definable Databases
  • Our tube bending software (program) helps the fabricator layout (design) profitable pipe and tubing designs saving set up costs (material waste) on any brand of pipe bender.

Another nice feature of Bend-Tech is its tube notching templates.  Bend-Tech creates cutting wrappers for your notching.  The wrappers are created from your assembly design, using your printer, showing the fishmouthing profile and calibration lines for linear and rotational placement around the tube allowing for precise notches every time.

Click on part number below to be redirected to the pricing table

Bend Tech Software
BT-PRO Bend Tech Pro
BT-SUPER SE Bend Tech SE

 

B-LUBE - TUBE AND PIPE BENDING LUBRICANT

Available in 8, 16, and 32 oz bottles

B-Lube is a synthetic gel formulated as a lubricant for draw bending tube and pipe. It forms a high strength lubricating film on the mandrel and ID of the tube that will not slump or run off, even under high temperatures. B-Lube was developed for bending and end-forming automotive exhaust tubing. It is recommended for use on steel, stainless steel, 409 SS, and 409 aluminized SS tubing. For bending aluminum mix one part of petroleum oil or vegetable oil based drawing compound to 2-3 parts B-Lube.

USAGE

B-Lube should be used as a concentrate for difficult bending operations. For lighter duty bending, it may be diluted up to 3 to 1 with water. It can be applied by hand or through automatic mandrel rod lubrication systems capable of pumping higher viscosity fluids or greases. It is important to maintain sufficient lubricant on the tool to keep it liquid and to prevent it from “drying-out". B-Lube is easy to clean in a mild cleaner.

BENEFITS

  • Contains No Hazardous Ingredients
  • Contains No Petroleum Oil
  • Does Not Contain Chlorine or Sulfur
  • Spreads Evenly and Does Not Run From High Temperatures
  • Cleans Easily in Low Temperature Water Base Solutions
  • Can be Welded Through Without Cleaning
  • Is Environmentally and Operator Friendly

Click on the part number below to be redirected to the pricing table

Bend Lubricant
B-LUBECP 8oz Biodegradeable Bend Lube
B-LUBEPT 16oz Biodegradeable Bend Lube
B-LUBEQT 32oz Biodegradeable Bend Lube

 

IDX-10-250
10 INDEX TABLE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: IDX-10-250
BAIIDX-10-250
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-10-CMH-4-25
H-4-250}10 INDEX TABLE WITH A 4 JA ** CALL FOR PRICING
Mfg. item #: IDX-10-CMH-4-25
BAIIDX-10-CM{03
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-10-325
10 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-10-325
BAIIDX-10-325
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-10-CMH-4-32
H-4-325}10 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-10-CMH-4-32
BAIIDX-10-CM{05
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-10-350
10 INDEX TABLE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: IDX-10-350
BAIIDX-10-350
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-250
15 INDEX TABLE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: IDX-15-250
BAIIDX-15-250
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-CMH-4-25
H-4-250}15 INDEX TABLE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: IDX-15-CMH-4-25
BAIIDX-15-CM{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-325
15 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-15-325
BAIIDX-15-325
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-CMH-4-32
H-4-325}15 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-15-CMH-4-32
BAIIDX-15-CM{01
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-350
15 INDEX TABLE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: IDX-15-350
BAIIDX-15-350
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-15-CMH-4-35
H-4-350}15 INDEX TABLE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: IDX-15-CMH-4-35
BAIIDX-15-CM{02
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-250
20 INDEX TABLE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: IDX-20-250
BAIIDX-20-250
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-CMH-4-25
H-4-250}20 INDEX TABLE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: IDX-20-CMH-4-25
BAIIDX-20-CM{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-325
20 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-20-325
BAIIDX-20-325
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-CMH-4-32
H-4-325}20 INDEX TABLE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: IDX-20-CMH-4-32
BAIIDX-20-CM{01
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-350
20 INDEX TABLE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: IDX-20-350
BAIIDX-20-350
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
IDX-20-CMH-4-35
H-4-350}20 INDEX TABLE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: IDX-20-CMH-4-35
BAIIDX-20-CM{02
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

816
1005905
ARC MASTER OUTSIDE RADIUS GAUGE (7-144 RADUIS)
Mfg. item #: 1005905
BAIORG-3600
Call for freight quote on this item or we will confirm freight charges before shipping.1
$339.15

630
1004947
ARC MASTER INSIDE RADIUS GAUGE (7-144RADIUS)
Mfg. item #: 1004947
BAIIRG-3600
Call for freight quote on this item or we will confirm freight charges before shipping.1
$333.90

630
1000210
DIGITAL ANGLE FINDER ACCURACY TO .02 DEGREES
Mfg. item #: 1000210
BAIAF-360D
Call for freight quote on this item or we will confirm freight charges before shipping.1
$78.93

630
1000211
CLAMP AND HOLDER , WILL ACCEPT UP TO 3 SCHEDULE 40 PIPE
Mfg. item #: 1000211
BAIAF-360D-H{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$202.20

630
UBP-1200-100
BEND PLATE FOR RDB-100 ** CALL FOR PRICING
Mfg. item #: UBP-1200-100
BAIUBP-1200-100
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-125
BEND PLATE FOR RDB-125 ** CALL FOR PRICING
Mfg. item #: UBP-1200-125
BAIUBP-1200-125
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-150
BEND PLATE FOR RDB-150 ** CALL FOR PRICING
Mfg. item #: UBP-1200-150
BAIUBP-1200-150
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-175
BEND PLATE FOR RDB-175 ** CALL FOR PRICING
Mfg. item #: UBP-1200-175
BAIUBP-1200-175
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-250
BEND PLATE FOR RDB-250 ** CALL FOR PRICING
Mfg. item #: UBP-1200-250
BAIUBP-1200-250
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

3613
UBP-1200-325
BEND PLATE FOR RDB-325 ** CALL FOR PRICING
Mfg. item #: UBP-1200-325
BAIUBP-1200-325
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-350
BEND PLATE FOR RDB-350 ** CALL FOR PRICING
Mfg. item #: UBP-1200-350
BAIUBP-1200-350
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
UBP-1200-500
BEND PLATE FOR RDB-500 ** CALL FOR PRICING
Mfg. item #: UBP-1200-500
BAIUBP-1200-500
FREE shipping ONLY when ordered with a machine from this manufacturer otherwise Ground UPS Will Be Added at Order Entry.20
Call for Price

816
1002158
BEND-TECH PRO TUBE AND PIPE BENDING SOFTWARE IS A LOWER COST ALTERNATIVE TO SE.
Mfg. item #: 1002158
BAIBT-PRO
Call for freight quote on this item or we will confirm freight charges before shipping.1
$690.90

630
1002159
BEND-TECH SUPER SE IS THE TOP OF THE LINE IN TUBE AND PIPE BENDING SOFTWARE.
Mfg. item #: 1002159
BAIBT-SUPER SE
Call for freight quote on this item or we will confirm freight charges before shipping.1
$875.70

630
1000719
8OZ TRIAL SIZE B-LUBE
Mfg. item #: 1000719
BAIB-LUBECP
Call for freight quote on this item or we will confirm freight charges before shipping.1
$15.79

630
1000720
16OZ BOTTLE OF B-LUBE, WITH APPLICATOR TIP
Mfg. item #: 1000720
BAIB-LUBEPT
Call for freight quote on this item or we will confirm freight charges before shipping.1
$25.50

630
1000721
32OZ BOTTLE OF B-LUBE, WITH APPLICATOR TIP
Mfg. item #: 1000721
BAIB-LUBEQT
Call for freight quote on this item or we will confirm freight charges before shipping.1
$34.00

630
Copyright © 2024 Smith-Hamilton, Inc
0.062 240131 13:19