Technical Sales 1–800–458–3687

General Equipment Ventilation Non-Hazardous

GP8 VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER 3-1/2 HP GP8h EP8 EP8ACP
GP8 VelociMax 3HP Gas Non-hazardous Location Air Ventilation Blower GP8H VelociMax 4HP Gas Non-hazardous Location Air Ventilation Blower EP8 VelociMax 1/3HP Electric Non-hazardous Location Air Ventilation Blower EP8ACP VelociMax 1/3HP Electric Non-hazardous Location Air Ventilation Blower
EP8AC25P EP12ACP EP16ACP EP20ACP DownForce Non-hazardous Location Air Ventilation Blower
EP8AC25P VelociMax 1/3HP Electric Non-hazardous Location Air Ventilation Blower EP12ACP VelociMax 1HP Electric Non-hazardous Location Air Ventilation Blower EP16ACP VelociMax 1HP Electric Non-hazardous Location Air Ventilation Blower EP20ACP DownForce Non-hazardous Location Air Ventilation Blower
CD10P CARPET DRYER Non-hazardous Location Air Ventilation Blower AF501 AIR-SCRUB-R Portable HEPA Air Filter
CD10P CARPET DRYER Non-hazardous Location Air Ventilation Blower AF501 AIR-SCRUB-R Portable HEPA Air Filter

 

VelociMax SERIES NON-HAZARDOUS VENTILATION BLOWERS
MODEL DESCRIPTION WEIGHT (LBS)
GP8 Blower, radial, 3.5 HP, Briggs and Stratton gasoline engine, 4-stroke, 8 inch diameter inlet/outlet, free air ow: 1561.6 CFM, less duct. 64.0
GP8H Blower, radial, 3.5 HP,Honda gasoline engine, 4-stroke, 8 inch diameter inlet/outlet, free air ow: 1561.6 CFM, less duct. 66.0
EP8 Blower, radial, .33 HP, 115 VAC. 60 HZ, single phase, electric motor, 8 inch diameter inlet/outlet, free air ow: 1277.4 CFM, less duct. 57.6
EP8ACP Blower, axial, .33 HP, 115 VAC. 60 HZ single phase, electric motor, 8 inch diameter inlet/outlet, 25 foot length power cord, free air ow: 501.0 CFM, less duct. 15.0
EP8AC25P Blower, axial, .33 HP, 115 VAC. 60 HZ single phase, electric motor, 8 inch diameter inlet/outlet, integral 25 foot duct, 25 foot length power cord, free air ow: 902.4 CFM. 28.0
EP12ACP Blower, axial, 1 HP, 115 VAC. 60 HZ single phase, electric motor, 12 inch diameter inlet/outlet, 25 foot length power cord, free air ow: 1825.0 CFM, less duct. 26.0
EP16ACP Blower, axial, 1 HP, 115 VAC. 60 HZ single phase, electric motor, 16 inch diameter inlet/outlet, 25 foot length power cord, free air ow: 4450.0 CFM, less duct. 33.6
NON-HAZARDOUS DRYING/COOLING/CIRCULATION
MODEL DESCRIPTION WEIGHT (LBS)
EP20ACP Blower, axial, .40 HP, 115 VAC, 60 HZ, 2-speed electric motor, 25 foot length power cord, free air ow: 3500.0, less duct. 41.0
CD10P Carpet Dryer, radial, 1 HP, 115 VAC, 60 HZ, 3-speed electric motor, 25 foot length power cord, free air ow up to 3800.0 CFM. 35.0
NON-HAZARDOUS AIR-SCRUB-R PORTABLE HEPA AIR SCRUBBER
MODEL DESCRIPTION WEIGHT (LBS)
AF501 Scrubber, air, .25 HP, 115 VAC, 60 HZ, 9.5 inch inlet, 5 x 13 inch outlet, variable speed, air ow rate up to 500 CFM, 15 foot length power cord, includes primary and HEPA lter. 31.4
FD SERIES - DUCT COUPLERS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
FD8C Duct coupler, 8 inch diameter, stainless steel, heavy-duty, includes clamps. 1.3 FD815, FD825
FD12C Duct coupler, 12 inch diameter, stainless steel, heavy-duty, includes clamps. 1.7 FD1225, FD1250
FD16C Duct coupler, 16 inch diameter, stainless steel, heavy-duty, includes clamps. 2.5 FD1625
FD SERIES - DUC-PACTM DUCTING
MODEL DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
FD815 Duct, 8 inch diameter, 15 foot length, integral storage bag. 5.8

GP8, GP8H, EP8, EP8ACP

FD825 Duct, 8 inch diameter, 25 foot length, integral storage bag. 7.5
FD1225 Duct, 12 inch diameter, 25 foot length, integral storage bag. 9.8 EP12ACP, AF501
FD1250 Duct, 12 inch diameter, 50 foot length, integral storage bag. 22.8 EP12ACP
FD1625 Duct, 16 inch diameter, 25 foot length, integral storage bag. 13.4 EP16ACP
DB SERIES - DUST COLLECTION BAGS
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
DB810 Dust collection bag, 8 inch diameter, 9.8 foot length. 3.3 GP8, GP8H, EP8, EP8ACP
DB1210 Dust collection bag, 12 inch diameter, 9.8 foot length. 4.1 EP12ACP
DB1610 Dust collection bag, 16 inch diameter, 9.8 foot length. 5.8 EP16ACP
AF501 - FILTERS and DUCTING
PART NUMBER DESCRIPTION WEIGHT (LBS) COMPATIBLE PRODUCT
AF501-0010PAK3 Filter, primary, 99 percent effciency, 15.75 x 15.75 x 0.75 inches. Pack of 3. 2.1

AF501

AF501-0020 Filter, HEPA, 99.97 percent effciency, 19 x 16 x 2 inches. Pack of 1. 3.6
AF501-0030PAK2 Filter, activated carbon, 15.75 x 15.75 x 0.75 inches. Pack of 2. 2.0
LFD16100 Ducting, lay at, 16 inch diameter, 100 foot length, 6 mil clear polyethylene, includes pack of 17 attachment bands. For outlet applications only. 7.7

 

GP8 VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

GP8 VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER 3-1/2 HP Briggs & Stratton gasoline engine. 8 inch inlet and outlet diameter. Cast aluminum fan and blower housing construction; spring mounted on skids. Less duct. Free Air Flow: 1561.6 CFM General’s line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. Constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing.

Specifications:

POWER SOURCE
Type: 3.5 HP (2.4kw), Briggs and Straton Model 91232, engine
RPM: 3600
Speed Control: Governor with manual speed control, adjustable to vary blower volume

BLOWER
Type: Radial
Material: Cast aluminum
Wheel Type: Steel
Size: 8 inch (203 mm) Nominal Diam. Inlet/ Outlet

GENERAL
Mounting: Spring
Type: Anti-Vibration
Weight: 56 lbs (25 kg)

DIMENSIONS
Height: 20-1/2 inch (521 mm) Length: 18 inch (457 mm) Width: 16-1/4 inch (413 mm)

FLOW RATES
Free Air: 1561.6 CFM (44.2 cmm)
One 90 Degree Bend: 1178.1 CFM (33.3 cmm)
Two: 90 Degree Bends: 1066.2 CFM (30.2 cmm)

 

GP8H VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

GP8H VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Specifications:

POWER SOURCE
Type: 3.5 HP (2.4kw), Honda, GX120, 4- Cycle engine
RPM: 3600
Speed Control: Governor with manual speed control, adjustable to vary blower volume

BLOWER
Type: Radial
Material: Cast aluminum
Wheel Type: Steel
Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet

GENERAL
Mounting: Spring
Type: Anti-Vibration
Weight: 56 lbs (25 kg)

DIMENSIONS
Height: 20-1/2 inch (521 mm) Length: 18 inch (457 mm) Width: 16-1/4 inch (413 mm)

FLOW RATES
Free Air: 1561.6 CFM (44.2 cmm)
One 90 Degree Bend: 1178.1 CFM (33.3 cmm)
Two: 90 Degree Bends: 1066.2 CFM (30.2 cmm)

 

EP8 VELOCIMAXâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP8 VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed to accommodate most non hazardous confined space ventilation requirements. Built with heavy-gauge aluminum and steel construction. Applicable models certified by Canadian Standards Association (CSA). All units offer independent laboratory certified air flow rates. Less air duct unless included as a standard component.

Specifications:

POWER SOURCE
Type: 1/3 HP (.23Kw), 60Hz, 115 Volts, AC, Single Phase
RPM: 1725
Speed Control: Single Speed

BLOWER
Type: Radial
Material: Cast aluminum
Wheel Type: Steel
Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet

GENERAL
Mounting: Rubber
Type: Anti-Vibration
Weight: 53 lbs (24 kg)

DIMENSIONS
Height: 19-3/4 inch (502 mm) Length: 18-1/4 inch (464 mm) Width: 14-1/2 inch (368 mm)

FLOW RATES
Free Air: 1277.4 CFM (35.7 cmm
One 90 Degree Bend: 738 CFM (20.7 cmm)
Two: 90 Degree Bends: 578.8 CFM (16.2 cmm)

 

EP8ACP VELOCIMAXâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP8ACP VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed with flexibility in mind, every feature of the EP8ACP VelociMax Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV- resistant polyethylene, making it dent- resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency.

Specifications:

POWER SOURCE
Electric Motor: 1/3HP, 110 VAC, 60HZ, single speed
Speed Control: Single Speed

BLOWER
Type: Axial
Material: High density, UV resistant polyethylene
Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet

GENERAL
Material: High density, UV resistant polyethylene
Weight: 17 lbs (7.7 kg)

DIMENSIONS
Height: 14-1/4 inch ( mm)
Length: 13 inch ( mm)
Width: 11 inch ( mm)

FLOW RATES
Free Air: 501 CFM ( cmm
One 90 Degree Bend: 351 CFM ( cmm)
Two: 90 Degree Bends: 316 CFM ( cmm)

 

EP8AC25P VELOCIMAXâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP8AC25P VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed with flexibility in mind, every feature of the EP8AC25P VelociMax BLOW-R- PAC, Ventilation Blower complete with 8 inch diameter x 25 foot flexible duct and integral storage canister. is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency.

Specifications:

POWER SOURCE
Electric Motor: 1/3HP, 115 VAC, 60HZ, single speed
Speed Control: Single Speed

BLOWER
Type: Axial
Material: High density, UV resistant polyethylene
Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet and 25 foot flexible duct with integral storage canister

GENERAL
Material: High density, UV resistant polyethylene
Weight: 59 lbs (26.76 kg)

DIMENSIONS
Height: 15 inch (381 mm)
Length: 33.5 inch (850.9 mm)
Width: 13.5 inch (342.9 mm)

FLOW RATES
Free Air: 902.35 CFM (25.55 cmm)
One 90 Degree Bend: 547.63 CFM (15.51 cmm)
Two: 90 Degree Bends: 477.30 CFM (13.52 cmm)

 

EP12ACP VELOCIMAXâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP12ACP VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed with flexibility in mind, every feature of the EP12ACP VelociMax Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV-resistant polyethylene, making it dent-resistant, corrosion-proof and virtually indestructible. Air flows rates are certified by an independent testing agency.

Specifications:

POWER SOURCE
Electric Motor: 1HP, 115 VAC, 60HZ, single speed
Speed Control: Single Speed

BLOWER
Type: Axial
Material: High density, UV resistant polyethylene
Size: 12 inch (305 mm) Nominal Diam. inlet/ Outlet
Weight: 35 lbs (16 kg)

DIMENSIONS
Height: 20-1/4 inch ( mm) Length: 15-3/4 inch ( mm) Width: 19-3/4 inch ( mm)

FLOW RATES 25ft.
Free Air: 1825 CFM ( cmm
One 90 Degree Bend: 1443 CFM ( cmm)
Two: 90 Degree Bends: 1341 CFM ( cmm)

FLOW RATES 50ft.
Free Air: 1825 CFM ( cmm
One 90 Degree Bend: 1368 CFM ( cmm)
Two: 90 Degree Bends: 1290 CFM ( cmm)

 

EP16ACP VELOCIMAXâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP16ACP VELOCIMAX NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Designed with flexibility in mind, every feature of the EP16ACP VelociMax Ventilation Blower is designed to meet the confined space ventilation demands for many construction, utility, and municipal applications. Straight thru, axial flow design maximizes air flow delivery rates with input horsepower. Sturdy, easy-grip handle molded directly into the housing makes for convenient, reliable transport. The tough, double-walled housing is molded from UV- resistant polyethylene, making it dent- resistant, corrosion-proof and virtually indestructible.

Specifications:

POWER SOURCE
Electric Motor: 1HP, 220 VAC, 50HZ or 1/3HP, 110 VAC, 60HZ
Speed Control: Single Speed

BLOWER
Type: Axial
Material: High density, UV resistant polyethylene
Size: 16 inch (400 mm) Nominal Diam. inlet/ Outlet

GENERAL
Material: High density, UV resistant polyethylene
Weight: 44.09 lbs (20.0 kg)

DIMENSIONS
Height: 22.2 inch (495 mm)
Length: 19.5 inch (565 mm)
Width: 20.8 inch (530 mm)

FLOW RATES
Maximum Free Air Flow Rate: 22.6M3

 

EP20ACP DOWNFORCEâ„¢ NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

EP20ACP DOWNFORCE NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

Use the EP20ACP DownForce Ventilation Blower for both vertical and horizontal air flow movement job applications including carpets, subfloors, cabinets, closets, ceilings, attic areas and damaged drywall, Dry an entire room in just a matter of a minutes and not hours. Use it to effectively dry an entire room quickly and easily by using standard and accepted air movement principles. The multi-bladed propeller draws in warmer and less humid air from above, forces it down at high velocity and disperses it across the entire floor as a fast and effective drying solution. The effect is a vertically oriented convection pattern that helps maximize water absorption and the heat transfer necessary to dry floor surfaces. The boxed-type design gives the EP20ACP added versatility when placed in a horizontal configuration. Position it within a work area to create a horizontal convection air flow pattern to cool personnel or dilute the effects of contaminated air.

Specifications:

POWER SOURCE
Electric Motor: 320 W, 115 VAC, 60 HZ, 3.8 amperes, 2 speed
Speed Control: Single Speed

BLOWER
Type: DOWNFORCE CONVECTION BLOWER
Material: High density, UV resistant polyethylene
Size: 20 inch (508 mm) Nominal Diam. inlet/ Outlet

GENERAL
Operating Positions: Four
Weight: 53 lbs (24 kg)

DIMENSIONS
Height: 22 inch ( mm)
Length: 26 inch ( mm)
Width: 22-3/4 inch ( mm)

 

CD10P CARPET DRYER NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

CD10P CARPET DRYER NON-HAZARDOUS LOCATION AIR VENTILATION BLOWER

The CD10P Carpet Dryer is a powerful and efficient way move air to accelerate evaporation rates for drying carpets, hardwood floors, flooded areas, and general air circulation requirements. For minor flooding events in the home or office, quick drying with a dryer is the best defense against the formation of mold and mildew. Can be aimed horizontally, vertically or at a 45 deg angle to maximize convection patterns. A three speed electric motor varies air flow rates to meet almost every job requirement. The low 72 dB noise level makes it the ideal solution for drying entryway mats in wet weather, hallway corridors during normal maintenance or any area that is noise sensitive. Carry handle is balanced for easy transport. This blower is powerful, durable and lightweight.

Specifications:

POWER SOURCE
Electric Motor: 1 HP, 115 VAC, 60HZ, 3 speed

BLOWER
Type: Carpet Dryer
Fan Construction: Galvanized steel
Material: High density, UV resistant polyethylene

GENERAL
Operating Positions: Horizontal, 45 deg, Vertical
Weight: 42 lbs (19 kg)

DIMENSIONS
Height: 21 inch ( mm)
Length: 19-3/4 inch ( mm)
Width: 18 inch ( mm)

 

AF501 AIR-SCRUB-Râ„¢ PORTABLE HEPA AIR FILTER AF501 AIR-SCRUB-R PORTABLE HEPA AIR FILTER

Provide outstanding air filtration in non- hazardous environment applications.

The Model AF501 AIR-SCRUB-R provides a compact, portable, HEPA filtration solution delivering air scrubbing/negative pressure air movement capabilities. Its two-stage design features a pre-filter and a high efficiency HEPA filter for outstanding air filtration in a wide range of industrial and construction related job applications. An optional activated carbon filter can replace the standard pre-filter to help absorb a wide range of volatile organic compounds (VOCs), smoke, plus other noxious odors and contaminants. A clean filter indicator light tells the operator when to change the filter to maintain optimum airflow and filtration. The unit comes with a variable speed motor for adjustable airflow rates up to 500 CFM. Capable of daisy-chaining multiple units together on a single circuit using the integral GFCI outlet and 12 Ampere breaker. In addition, the AF501 offers a 9.5 inch diameter inlet for maximum airflow, low power consumption and easy attachment of standard ventilation ducts for negative/evacuation air flow applications.

Features:

  • 30 percent pre-filter
  • 99.97 percent efficient at 0.3 micron HEPA secondary filter
  • Clean filter indicator light
  • 56-72 dBA sound level
  • Daisy-chain capability
  • Operate up to 4 units from 1 circuit
  • Stackable, lightweight, transportable

 

Non-hazardous Standard Ducts


 
Part No.
Description
s-h alt
FD815

DUC-PAC 8 inch nominal diameter x 15 foot length, vinyl coated, synthetic fabric construction; wire helix reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends Complete with integral storage bag.

 
FD825

DUC-PAC 8 inch nominal diameter x 25 foot length, vinyl coated, synthetic fabric construction; wire helix  reinforcement with anti-scuff strip; nylon ring and securing strap on opposite ends. Complete with integral storage bag.

  SCHL8 CANISTER, STORAGE, ALUMINUM, 8

 

Duct Coupler


 
Part No.
Description
s-h alt
FD8C

Allows two lengths of 8 inch nominal diameter flexible duct to be attached together with clamps. Heavy duty, 24 gauge, galvanized or stainless steel construction. For use in non-hazardous locations only. Increased duct length can substantially reduce air flow rate.

 

LIMITED PRODUCT WARRANTY


GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operators Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

GP8
BLOWER, GAS, 4HP, 8D
Mfg. item #: GP8
GENGP8
Call for freight quote on this item or we will confirm freight charges before shipping.1
$869.70

154
GP8H
BLOWER, GAS, 4HP, 8D
Mfg. item #: GP8H
GENGP8H
Call for freight quote on this item or we will confirm freight charges before shipping.1
$1,064.70

154
EP8
BLOWER, .33HP, 115VAC, 8D
Mfg. item #: EP8
GENEP8
Call for freight quote on this item or we will confirm freight charges before shipping.1
$815.10

154
EP8ACP
BLOWER, .33HP, 220VAC, 8D
Mfg. item #: EP8ACP
GENEP8ACP
Call for freight quote on this item or we will confirm freight charges before shipping.1
$288.44

154
EP8AC25P
BLOW-R-PAC, 115VAC, 25L, 8D
Mfg. item #: EP8AC25P
GENEP8AC25P
Call for freight quote on this item or we will confirm freight charges before shipping.1
$400.76

154
EP12ACP
BLOWER, 1.0HP, 220VAC, 12D
Mfg. item #: EP12ACP
GENEP12ACP
Call for freight quote on this item or we will confirm freight charges before shipping.1
$347.70

154
EP16ACP
BLOWER, 1.0HP, 220VAC, 16D
Mfg. item #: EP16ACP
GENEP16ACP
Call for freight quote on this item or we will confirm freight charges before shipping.1
$395.22

154
EP20ACP
BLOWER, 0.4HP, 220VAC, 20D
Mfg. item #: EP20ACP
GENEP20ACP
Call for freight quote on this item or we will confirm freight charges before shipping.1
$368.29

154
CD10P
BLOWER, CARPET, 1.0HP, 220VAC
Mfg. item #: CD10P
GENCD10P
Call for freight quote on this item or we will confirm freight charges before shipping.1
$305.72

154
AF501
SCRUBBER, AIR, .25HP, 115VAC
Mfg. item #: AF501
GENAF501
Call for freight quote on this item or we will confirm freight charges before shipping.1
$682.50

154
FD8C
COUPLER, DUCT, 8D
Mfg. item #: FD8C
GENFD8C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$55.25

154
FD12C
COUPLER, DUCT, 12D
Mfg. item #: FD12C
GENFD12C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$94.74

154
FD16C
COUPLER, DUCT, 16D
Mfg. item #: FD16C
GENFD16C
Call for freight quote on this item or we will confirm freight charges before shipping.1
$94.74

154
FD815
DUC-PAC, 8D, 15L
Mfg. item #: FD815
GENFD815
Call for freight quote on this item or we will confirm freight charges before shipping.1
$109.17

154
FD825
DUC-PAC, 8D, 25L
Mfg. item #: FD825
GENFD825
Call for freight quote on this item or we will confirm freight charges before shipping.1
$169.82

154
FD1225
DUC-PAC, 12D, 25L
Mfg. item #: FD1225
GENFD1225
Call for freight quote on this item or we will confirm freight charges before shipping.1
$234.81

154
FD1250
DUC-PAC, 12D, 50L
Mfg. item #: FD1250
GENFD1250
Call for freight quote on this item or we will confirm freight charges before shipping.1
$387.30

154
DB810
BAG, COLLECTION, DUST, 8D, 10L
Mfg. item #: DB810
GENDB810
Call for freight quote on this item or we will confirm freight charges before shipping.1
$42.25

154
DB1210
BAG, COLLECTION, DUST, 12D, 10L
Mfg. item #: DB1210
GENDB1210
Call for freight quote on this item or we will confirm freight charges before shipping.1
$69.00

154
DB1610
BAG, COLLECTION, DUST, 16D, 10L
Mfg. item #: DB1610
GENDB1610
Call for freight quote on this item or we will confirm freight charges before shipping.1
$89.17

154
AF501-0010PAK3
PAK3, FILTER, MAIN
Mfg. item #: AF501-0010PAK3
GENAF501-001{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$82.67

154
AF501-0020
FILTER, HEPA
Mfg. item #: AF501-0020
GENAF501-0020
Call for freight quote on this item or we will confirm freight charges before shipping.1
$112.51

154
AF501-0030PAK2
PAK2, FILTER, ODOR
Mfg. item #: AF501-0030PAK2
GENAF501-003{00
Call for freight quote on this item or we will confirm freight charges before shipping.1
$138.46

154
LFD16100
DUCT, FLAT, LAY, 16D, 100L
Mfg. item #: LFD16100
GENLFD16100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$155.66

154
Copyright © 2024 Smith-Hamilton, Inc
0.065 240308 10:52